Boonton
Audio Analyzer Boonton 1121A
The Model 1121A audio analyzer provides fast, accurate measurements including frequency, AC or DC level, distortion, SINAD and signal-to-noise ratio. It also includes an audio source providing accurate low distortion signals over wide frequencies and level ranges. Frequency range from 10 Hz to 200 kHz Low-distortion audio source for testing systems, amplifiers, receivers and components Measures AC/DC level, distortion, SINAD, S/N, frequency Ten readings per second 50-, 150- and 600-ohm output impedances 300 B5V full-scale range sensitivity 70 dB Common Mode Rejection Ratio Sweeps frequency or level Non-volatile memory for instant recall of up to 99 complete front-panel setups IEEE-488 interface..
Modulation Analyzer Boonton 8201A
The Model 8201A provides precision modulation and audio analysis in a single, easy-to-operate package. Measures AM, FM, PM, carrier and audio frequencies, SINAD, distortion and carrier level. Carrier frequency range: 100 kHz to 2.5 GHz 0 to 500 kHz FM deviation to 1% accuracy 0 to 99% AM to 1% accuracy 0 to 500 radians to 3% accuracy Audio distortion range 0.01% to 100% THD or 0 to 80 dB SINAD GPIB..
Peak Power Analyzer Boonton 4500C
The Boonton Model 4500C is the instrument of choice for capturing, displaying, analyzing and characterizing microwave and RF power in both the time and statistical domains. It is ideal for design, verification, and troubleshooting of pulsed and noise-like signals used in commercial and military radar, electronic warfare (EW), wireless communications (e.g., LTE, LTE-A, and 5G), and consumer electronics (WLAN), as well as education and research applications. Frequency range 30 MHz to 40 GHz Measurement range -60 dBm to +20 dBm RF channel video bandwidth 125 MHz RF channel rise time < 5 ns Overall accuracy 0.2 dB Time Resolution 100 ps Min Pulse Width / Max PRF 6 ns / 50 MHz Channels 2 RF and 2 trigger Real-Time Power Processing™ Ultrafast trace acquisition and refresh rate One button push for 15 automated power and time measurements Automatic peak-to-peak, delay-by-time and delay-by-events triggering Multi-level, multi-function calibrator Continuous statistical analysis (..
Peak Power Meter Boonton 4530
End of Life..
Peak Power Meter Boonton 4540
End of Life..
Real-Time Peak USB Power Sensors Boonton RTP5000
Providing the highest video bandwidth and fastest rise times, RTP5000 peak USB power sensors with Boonton’s Real-Time Power ProcessingTM deliver 100,000 measurements per second, no gaps in signal acquisition and zero measurement latency. Combining this performance with automatic pulse measurements, CCDF and crest factor statistical analysis, multi-channel capabilities and documentation tools RTP5000 peak power sensors are the ideal instrument for fast, accurate and reliable RF power measurements. 6 GHz, 8 GHz, 18 GHz and 40 GHz RF Power Sensors Up to 195 MHz video bandwidth with 3 ns rise time Real-Time Power ProcessingTM technology with zero measurement dead time 100,000 measurements per second Power Analyzer Suite advanced measurement and analysis software Crest factor, CCDF and statistical measurements 10 GS/s effective sample rate 100 MS/s continuous sample rate Synchronized multi-channel measurements Real-Time Power ProcessingTM Real-Time Power ProcessingTM (RTPP) t..
RF Power Meter Boonton 4240
The 4240 series of CW RF power meters provides the high speed measurement capability needed in a production environment, as well as the simplicity of operation required for bench top use. It provides very accurate measurements from -70 dBm to +44 dBm (sensor dependent) and has a rapid display update rate for tuning applications. The easy to read LCD displays both channels simultaneously with numeric and bar graph information. -70 dBm to +44 dBm, depending on sensor 90 dB dynamic range, depending on sensor 10 kHz to 40 Ghz measurement range Single or dual-channel display >200 measurements per second Agilent HP 437 & Agilent HP 438, and Boonton 4220A & 4230A emulation Automatically loads sensor data Simple software control via SCPI language 50 MHz step calibrator IEEE-488 and RS-232 interfaces standard..
RF Power Meter Boonton PMX40
The PMX40 provides design engineers and technicians the utility of traditional benchtop instrument, the flexibility and performance of modern USB RF power sensors, and the simplicity of a multi-touch display built with Boonton award-winning technology. As a benchtop meter, the PMX40 provides a standalone solution for capturing, displaying, and analyzing peak and average RF power in both the time and statistical domains through an intuitive, multi-touch touchscreen display. The PMX40 Power Meter utilizes up to four RTP and CPS families of USB RF power sensors with industry-leading performance and capabilities either independently or for synchronized multi-channel measurements of CW, modulated, and pulsed signals. Providing the ultimate flexibility, the PMX40 sensors can be disconnected and independently used as standalone instruments. Capture/display/analyze peak and average power Frequency range from 4 kHz to 40 GHz Industry-leading video bandwidth (195 MHz) and rise time (3 ns..
RF Signal Generator Boonton SGX1000
The SGX1000 series of RF signal generators offer high performance signal generation with an easy-to-use interface in a compact form factor. The SGX1000 utilizes a proprietary blend of direct digital and direct analog synthesis to provide ultra-fine frequency resolution, lightning-fast frequency switching, ultra-low phase noise and jitter, and superior reliability. The signal generator incorporates an intuitive, multi-touch display that enables easy access and configuration to perform frequency and/or power sweeps to address a wide variety of test requirements. Frequency range: 10 MHz to 18 GHz Output power range: -50 to +18 dBm 10/100 MHz reference input Multi-touch, touchscreen Lightning fast - Switching speed: 350µs (typ) Ultra-low phase noise (3 GHz, 10 kHz offset) -122 dBc/Hz (typ) Ultra-low jitter: 60 fs (typ) Excellent amplitude accuracy (as low as -40 dBm): +/-0.5 dB (typ)..
RF Voltmeter Boonton 9240
The 9240 series is the latest addition to Boonton’s popular 9200 series of RF voltmeters. It combines accuracy, smart probes, and operator features that have never before been available in its price range. It is simple to use on the bench, and comprehensive enough to integrate into an ATE system. Boonton’s proven voltage probes directly measure from 200 μV to 10 V with usable indication as low as 50 μV and have true RMS response below 30 mV. 10 Hz to 1.2 GHz measurement range* Dual-channel and differential voltage measurements 200 μV to 300 V measurement range 1% accuracy at full scale DC recorder output IEEE-488 interface standard, RS-232 *Probe dependent..